Thursday, February 23, 2017

A Little Serger Tip

I thought I'd do this short post in response to how many times I've seen this issue come up in classes.

I took a picture of three different samples sewn on the same serger. The tension was set exactly the same on each one.
On the sample on the left, the edge of the fabric is curled. The sample in the middle, the looper threads go too far beyond the edge of the fabric. To correct both problems, I did not fiddle with looper tensions. I simply changed the width to which the fabric was cut. 
For the left one, I decreased the cutting width, which pulled the fabric away from the edge of the threads. For the middle one, I increased the width, which brought the fabric out to the edge of the threads.
I let the fabric determine for me, where to set the cutter. This is much easier than playing with tension. 
The sample on the right was easily achieved using this method.


Dressmaking Fabrics said...

Sewing gave me a new reason to be happy, well I was in the verge of depression when I first learn how to sew, my doctor advised me to look for a new hobby and one of my friends introduced me to sewing. I loved it, dressmaking fabrics gave me a new way to live my life now I make lovely things for my love ones and they appreciate it a lot.

Ariyan Islam said...

Hi Sir,
Thanks for sharing the ideasss.. this is so helpful and i am using these websites regularly.

alex amarxon said...
This comment has been removed by a blog administrator.
Stephen said...
This comment has been removed by a blog administrator.